Skip to main content

2D drawings

A drawing can be the thing you set out to make, not a by-product of a solid.

Drawn, not projected

The usual way to get a 2D drawing is to model a solid and project it. That works here too. A 2D design drawing starts on the sheet instead: you say what the outline is, where the holes go and which dimensions matter, and the engine draws the lines and arcs. Nothing is extruded, and there is no solid behind the sheet.

What is on the sheet

Geometry on named layers, dimensions carrying the tolerances you declare, and a title block. Where nothing more specific is declared, ISO 2768-m is the general tolerance — the same convention the projected sheets use. Every entity is editable; the file is a drawing document, not a picture of a drawing.

What comes out

The DXF is the deliverable: it opens in any 2D CAD with its layers, line types and title block intact, so a drafter changes a dimension instead of redrawing the sheet. The PDF is the same sheet for printing, marking up and sending on.

When you want the solid instead

If the thing has thickness, a bore or a fillet, model it in 3D and let the sheet be projected from it — then the view and the part cannot disagree. Start from whichever one you actually have to hand over.

What it is not

It is a mechanical drawing tool, not a general drafting application: no floor plans, no electrical schematics, no piping and instrumentation diagrams, no survey drawings.