Skip to main content

What it will not do

The list is short and it is not going to change quietly.

It is a mechanical part modeller

ChatCAD writes parametric B-rep parts — brackets, plates, flanges, housings, spacers, simple assemblies — and drafts 2D mechanical drawings: flat parts, profiles, gaskets, templates. It is not an architectural or interior design tool. No floor plans, construction or filing drawings, no electrical or piping schematics.

It does not certify anything

No structural, pressure or lifting analysis, no safety sign-off, no tolerance stack-up guarantee, no stamped drawings. If a part can hurt someone when it fails, the model here is a starting point for an engineer, not a release.

It cannot invent dimensions

If a critical dimension is missing, the assistant either asks or states the assumption it made — and the assumption is visible in the parameters. A number invented silently is a part that gets made wrong.

Freeform surfaces

Organic shapes, blended class-A surfaces and reverse engineering from photos or scans are out of scope. A photo tells the assistant what a part looks like; it cannot tell it how big the part is.